YX85-120 Downspout Roll Forming Machine

Main Components:

1, Decoiler 
2, Roll Former 
3, Hydraulic Post Cutting Device 
4, PLC Control Cabinet 
5, Runout rack

Technical Proposal:

Job Material: 

Thickness: 0.4-0.6mm, 0.6mm thickness is for inspection, common use
Infeed Coil Width: 406mm 
Pre-painted galvanized coil, Tension Grade: 245Mpa

3TonX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expending system
Pump power=1.5KW
Load capacity=3 Ton, Coil Inner – diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm

Roll Former

Feeding section with guide, Manual Pre-shearing unit, Film on unit
Gear/Sprocket driving, 16 steps to form
A3 18mm thickness Steel wall plate with bearing seat to hold rollers
H450 steel base frame
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =11 KW, Frequency speed control
Forming speed：Approx. 15m/min
Protection Mesh Cover Above Roll-former To Avoid Hands Go Inside, with PVC transparent cloth to reduce the dust go into machine

Hydraulic Cutting Device

Stop to cut, Post cut, no slug
Pump motor =4KW, Cutting pressure=Max.12Mpa
Cutting tool material: Cr12, Heat treatment

PLC Control System

Control the quantity & cutting length automatically.
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage: 24V

Product Rack

un-powered, 3 meters length, 2 units

Elbow Machine

Pump motor: 4Kw
Overall dimensions: 0.9x0.9x1.5m