Automatic Metal Omega Profile Roll Forming Machine

Main Components:

1, Decoiler 
2, Roll Former 
3, Hydraulic Post Cutting Device 
4, PLC Control Cabinet 
5, Runout rack

Technical Proposal:

Job Material: 

Thickness: 2.0-3.0mm, 2.0mm thickness is for inspection, common use
Infeed Coil Width: 600mm 
Pre-painted galvanized coil, Tension Grade: 245Mpa

5TonX600mm Manual Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expending system
Load capacity=5 Ton, Coil Inner – diameter =470-530 mm
Coil outer-diameter=Max. 1300 mm
Coiler Width=Max. 600 mm

Roll Former

Feeding section with guide, 
Pre-Leveling Device
5 shafts to leveling, Precision Machined, hard Chrome Coated
Hydraulic Pre-punch Device

Gear/Sprocket driving,

16 steps to form
Forge steel Torii frame with bearing seat to hold rollers
H450 steel base frame
Rollers manufactured from Gcr15, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =22KW, Frequency speed control
Forming speed: Approx. 12m/min

Hydraulic Cutting Device

Stop to cut, Post cut, no slug
Pump motor =3KW, Cutting pressure=Max.10Mpa
Cutting tool material: Cr12, Heat treatment

PLC Control System

Control the quantity & cutting length automatically.
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage: 24V

Product Rack

un-powered, 3m in length, 2 units