YX35-130-780 Corrugated Metal Roofing Roll Forming Machine

The YX35-130-780 Corrugated Metal Roofing Roll Forming Machine allows architects and designers to create a bolder corrugated roof line.

Main Components:

1, Decoiler 
2, Roll Former 
3, Hydraulic Post Cutting Device 
4, PLC Control Cabinet 
5, Runout rack

Technical Proposal:

Job Material: 

Thickness: 0.4-0.8mm, 0.6mm thickness is for inspection, common use
Infeed Coil Width: 1000mm 
Pre-painted galvanized coil, Tension Grade: 245Mpa

5TONX1250mm Hydraulic Un-Coiler

Hydraulic system to expand coil inner hole, Pump motor: 3.0KW
Link-connect system to expend the inner-diameter of coil
Frequency Inverter to regulate turning speed, Motor: 2.2KW
Automatic stop device; Load capacity = Max.5Tons
Coil inner–diameter= 470-560mm; coil width = Max.1250mm

Roll Former

Feeding section with guide, Manual Pre-shearing unit,
Gear/Sprocket driving, 28 steps to form
A3 18mm thickness Steel wall plate with bearing seat to hold rollers
H450 steel base frame
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Forming speed：Approx. 12m/min
Protection Mesh Cover Above Roll-former To Avoid Hands Go Inside, with PVC transparent cloth to reduce the dust go into machine

Hydraulic Cutting Device

Stop to cut, Post cut, no slug
Pump motor =3KW, Cutting pressure=Max.10Mpa
Cutting tool material: Cr12, Heat treatment

PLC Control System

Control the quantity & cutting length automatically.
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage: 24V

Product Rack

un-powered, 3 units